Analyzer-Sensors > Accessories

MSRP = $ 30 USD

Item: ROA-04-01

Expedition Flow Restrictor (Standard Connector) Same as the BC Flow Restricter but without the sensor cap.

MSRP = $ 35 USD

Item: ROA-04-02

BC Flow Restrictor to place on an external sensor, comes with a sensor cap.

MSRP = $ 8 USD

Item: ROA-05-01

Sensor Tee - For use with external sensors.

MSRP = $ 16 USD

Item: ROA-07-04

Expedition Flow Sensor Cap. Also used to attached air tube to an external sensor.

MSRP = $ 4.50 USD

Item: ROA-05-02

Sensor Saver. Increases the life of the sensor by sealing out the external air. Keep in mind that you will need to remove the sensor saver at least 24 hours before planned use to wake the sensor. The sensor cap causes the the sensor to go to sleep.

MSRP = $ 4 USD

Item: ROA-06-01

Straight Sensor Cable 2 foot / 60.96 cm. For use with Oxycheq Analyzers. Connect to The R-17D Oxygen Sensor.

MSRP = $ 85 USD

Item: ROA-04-04

Deluxe DIN Flow Restrictor (use with a tee or tubing). Contains a jeweled orifice to provide the proper flow.

RP = $ 7 USD

Item: ROA-04-05

El Cheapo DIN Tee - Complete the El Cheapo Analyzer Kit with the El Cheapo DIN Tee.

RP = $ 12 USD

Item: ROA-ECII-10T

High precision 10 Turn Panel Mount Pot for El-Cheapo II. This is an upgrade  for the existing pot. Less sensitive then the standard pot for the ECII. 1/4” shaft .

RP = $ 12 USD

Item: ROA-CASE

This is the same case used in the El Cheapo".  Has enough room to fit two panel meters.

RP = $ 14 USD

Item: ROA-PM

This is the same panel meter used in the "El Cheapo".  It is also one of the panel meters used in one of the designs in the "Oxygen Hacker".

RP = $ 25 USD

Item: ROA-MC

This is the gold plated connector that mates up with the R22D, R22ATT and R24MED. You will have to add and solder the wires. Pack of 5 connectors.

MSRP = $ 60 USD

Item: ROA-08-01

120 Volt AC Power Supply for Teledyne MixCheq He/O2. Saves on Batteries when using as a stationary analyzer. ROHS Compliant.

Analyzer-Sensors > Accessories