Analyzer-Sensors > MixCheq He/O2 Wallmount


Teledyne MixCheq He/O2

Analyzer - WallMount


MSRP: $ 1120 USD

Item: ROA-02-05



Standard Features

  1. BulletVery easy operation

  2. BulletConstant flow operation

  3. BulletTwo independent easy to read LCD displays for He and O2

  4. BulletLow power consumption

  5. BulletConvenient front panel ON-OFF power switch

  6. BulletFront panel mounted Span and Zero calibration controls

  7. BulletLinearized He channel output over the entire analysis range

  8. BulletMicroprocessor controlled electronics

  9. BulletLong-life, low temperature solid state thermal conductivity sensor for accurate helium analysis

  10. BulletRapid response, long life (up to 36 month) oxygen sensor

  11. BulletConvenient span calibration control for for calibrating the oxygen cell

  12. BulletWall Mount Case - Rugged dust tight housing with clear  door

  13. BulletVery easy battery and oxygen cell replacement

  14. BulletUniversal Power Supply (110 Volts to 240 Volts)


The Teledyne MIXCHEK is a CE approved portable  instrument designed to accurately monitor the composition of both oxygen and helium. The case is environmentally sealed. It has a +/- 1% accuracy across the entire 0-100% analysis range for both oxygen and helium.


The MIXCHEK analyzes the oxygen and helium concentrations in a gas mixture using a dedicated two-channel sensor network sharing a common sample system. The gas to be monitored is drawn into the analyzer and passed to the sensor network. A high output micro-fuel cell is used to determine the oxygen concentration of the gas mixture. The output of the micro-fuel cell is fed to the display and read out as percent oxygen. The sample gas is then directed to a thermal conductivity sensor. This sensor provides a signal that is proportional to the differences in conductivities between the components of the gas mixture. A microprocessor compares the sensor output to data contained in an onboard chip and converts the raw data into a linerized signal that is sent to the Helium LCD display.


This unit is perfect for mixing stations, fill stations or decompression chambers. Wall mount 6.2" L x 3.7" H x 5.9" W (157.5 x 94 x 149.9 mm) / 1.9 lbs. (0.86 kgs.)


Analyzer-Sensors > MixCheq He/O2 Wallmount